DESIGNER WALL PANELS
Acoustic Peel & Stick Panels - Nordic Oak
Acoustic Peel & Stick Panels - Nordic Oak
Panel Pack Calculator
Enter your project areas below (use centimetres).
Area 1
Not sure? Contact our team — we’ll double-check for you!
Currently out of stock
Product Description
Light, natural and effortlessly modern.
Create the Warm Timber Panel Look — Without the Heavy Panels or Complicated Installation
Bring warmth and light into your space with our Nordic Oak Acoustic Wood Panels. Featuring soft blonde timber tones, subtle natural grain and real wood veneer, Nordic Oak delivers the clean simplicity of Scandinavian-inspired interiors in a format designed to make DIY installation easier.
Love the architectural slat-wall look, but don't want to wrestle with huge, heavy panels?
Traditional acoustic wall panels are often supplied in long lengths that can be difficult to transport, manoeuvre and install yourself. They can also require locating studs and mechanically fixing large panels into position.
Our Nordic Oak panels take a different approach. At a practical 120cm high × 60cm wide, they're lightweight, manageable and fitted with a self-adhesive backing to make creating a designer feature wall far more approachable for a DIY renovator.
Soft Blonde Timber Tones for a Lighter, Calmer Interior
Nordic Oak combines subtle natural wood grain with a soft blonde finish that brings warmth without making the room feel dark or heavy. It's particularly well suited to Scandinavian, coastal, contemporary and minimalist interiors where you want timber texture while maintaining a light and open feel.
Why Choose Nordic Oak Acoustic Panels?
& STICK
No Nails. No Liquid Adhesive. No Hunting for Wall Studs.
The self-adhesive backing removes much of the complexity associated with traditional large acoustic panels. Prepare a suitable wall surface, carefully position your panel, peel away the backing and press firmly into place. It's a much simpler approach to creating an architectural timber feature yourself.
Why Our 120cm × 60cm Panel Size Makes So Much Sense
Many acoustic wall panels are supplied in extra-long lengths. That can look simple in a showroom, but it becomes a very different experience when you're trying to transport, carry, cut and install them in your own home.
Designed to Help Soften Noise and Echo
The timber slats sit over an acoustic felt backing designed to help absorb sound and reduce unwanted noise and echo within the room, while also creating a highly decorative architectural feature.
Acoustic performance can vary depending on the room, installation surface, surrounding materials and other conditions.
Where Nordic Oak Works Beautifully
The lighter timber tone makes Nordic Oak particularly versatile in spaces where you want warmth and texture without visually closing in the room.
Add real timber warmth, architectural slat detail and acoustic comfort to your space with a lightweight, self-adhesive panel system designed to make the transformation achievable for DIY renovators.
What you’ll need
- Tape measure
- Pencil
- Level or laser level (recommended)
- Clean cloth + mild cleaner (or sugar soap) and warm water
- Sharp utility knife with spare blades
- Fine-tooth saw or circular saw (recommended for straighter cuts)
- Optional: construction adhesive (for textured/low-grip walls or extra hold)
- Optional: roller (wallpaper seam roller) to help press down firmly
Step-by-step
Walls must be clean, dry, smooth and dust-free. Wipe down with sugar soap (or mild cleaner) and allow to dry fully. Avoid applying to freshly painted walls—ensure paint has cured.
Choose your starting edge and mark a straight reference line with a level. Decide slat direction and spacing (keep joins and edges consistent for the cleanest finish).
Hold each panel in position before sticking to confirm alignment, height and cut points (especially around skirting, corners, power points and trims).
Measure and cut panels to fit. For best results, use a fine-tooth saw for straight cuts. A sharp utility knife can be used to trim felt and small adjustments. Measure twice, cut once.
Peel the backing gradually (don’t remove it all at once). Align to your reference line, then press from the centre outwards. Keep edges tight and straight as you go.
Apply firm, even pressure across the entire panel (hands or a roller). Pay extra attention to edges and corners. If your wall is textured or paint is low-grip, add construction adhesive for extra hold.
Work panel by panel, checking alignment as you go. Keep slats parallel and maintain consistent spacing at joins for a seamless feature wall look.
Do a final firm press along all edges and joins. If you’re adding trims or finishing strips, install them last for a clean, professional finish.
For best adhesion, avoid installing on rough/textured walls, dusty surfaces, or walls exposed to moisture. If you’re unsure about your surface, use construction adhesive for added security.
We ship Australia-wide via courier. Shipping timeframes vary by location and stock availability.
If you’re in a remote area and have any concerns about delivery, please reach out before ordering.
Please refer to our returns policy for eligibility and timeframes.
These panels are self-adhesive laminate timber veneer faced acoustic wall panels that combine a modern walnut, nordic oak or charcoal oak finish with sound-absorbing performance. They are ideal for reducing echo and improving sound quality in spaces such as living rooms, bedrooms, home offices and media rooms.
No. These panels are designed to reduce echo and reverberation, not to fully soundproof a space. The level of improvement depends on room size, layout and how much wall area is covered.
Each panel measures approximately 1200 mm x 600 mm with a thickness of around 20 mm.
Each pack contains two panels and covers approximately 1.44 m².
Yes. The panels feature a peel-and-stick backing and are suitable for DIY installation. No specialist tools or trades are required.
They should be installed on clean, dry and smooth interior surfaces such as painted plasterboard, sealed walls or cabinetry. For best results, ensure the surface is free from dust, grease and moisture.
Yes. Panels can be trimmed to size using a sharp utility knife or fine saw to fit around power points, edges or custom layouts.
In most cases, the self-adhesive backing is sufficient. For textured walls or added security, a construction adhesive can be used.
They feature a timber-look veneer on the front with an acoustic felt backing that helps absorb sound.
The timber veneer can be lightly sanded and painted or stained if you wish to customise the finish prior to installation.
No. These panels are designed for dry internal spaces only. Prolonged exposure to moisture may affect adhesion and performance.
These panels are designed for vertical wall installation. Ceiling installation is not recommended due to weight and adhesive limitations.
Light dusting with a soft cloth or vacuum brush attachment is recommended. Avoid water and harsh cleaning products.
Panels can be removed, however some adhesive residue or minor paint damage may occur depending on the wall surface. Gentle heat can assist with removal.
Used them in our reception area as a background for our new signage
The stick on paneling we used around the base of the island kitchen bench and we are so happy with the outcome. They are easy to cut and place, are a lot lighter than what I thought they would be in weight and make the kitchen look like its had an expensive facelift.
Very nice. I ordered another to finish my project
Perfect for DIY Feature Walls on Any Budget
Choose from a range of colours
-
Sample Kit - Acoustic Panels
Regular price $9.95 AUDRegular price -
Acoustic Peel & Stick Panels - Walnut
Regular price $140.00 AUDRegular price -
Acoustic Peel & Stick Panels - Nordic Oak
Regular price $140.00 AUDRegular price -
Acoustic Peel & Stick Panels - Charcoal Oak
Regular price $140.00 AUDRegular price
