DESIGNER WALL PANELS
Acoustic Peel & Stick Panels - Walnut
Acoustic Peel & Stick Panels - Walnut
Panel Pack Calculator
Enter your project areas below (use centimetres).
Area 1
Not sure? Contact our team — we’ll double-check for you!
In stock and ready to despatch
Product Description
Rich, timeless and full of natural warmth.
Create a Warm Timber Feature Wall — Without the Heavy Panels or Complicated Installation
Add warmth, texture and architectural character to your interior with our Walnut Acoustic Wood Panels. The natural mid-brown timber tones and subtle grain create a look that feels sophisticated without being overly dark — ideal for contemporary spaces that need a little more depth and warmth.
Want the warmth of a timber slat wall without installing huge, heavy panels?
Traditional acoustic wall panels can be long, cumbersome and difficult to position, particularly when you're doing the project yourself. Installation can also involve drilling, locating studs and mechanically fixing oversized panels to the wall.
Our Walnut Acoustic Wood Panels are designed to make that look much more achievable. They're lightweight, 120cm × 60cm and self-adhesive, giving DIY renovators a much more manageable way to create a premium timber feature.
A Rich Mid-Tone Timber That Adds Warmth Without Overpowering the Room
Walnut sits beautifully between very light oak finishes and much darker timbers. Its warm brown colouring adds depth and character while remaining versatile enough for modern, contemporary and more classic interiors. The subtle natural grain provides an authentic timber finish that works especially well when you want the wall to feel warm, inviting and considered.
Why Choose Walnut Acoustic Panels?
& STICK
No Nails. No Liquid Adhesive. No Hunting for Wall Studs.
The self-adhesive backing removes much of the installation complexity associated with traditional large acoustic wall panels. Prepare a suitable wall surface, position the panel carefully, peel away the backing and press firmly into place. It's a cleaner and more DIY-friendly way to create a timber slat feature wall.
Why Our 120cm × 60cm Panels Make DIY So Much Easier
Many traditional acoustic wall panels are supplied in extra-long lengths. That can make them difficult to transport, carry through the house and hold in position during installation. Our shorter panel format makes the project much more manageable.
Designed to Help Soften Unwanted Noise and Echo
The timber slats sit over an acoustic felt backing designed to help absorb sound and reduce unwanted echo within the room while also creating a decorative architectural feature.
This makes Walnut particularly well suited to bedrooms, living spaces, home offices and media areas where you want the room to feel both warmer and more comfortable.
Where Walnut Works Beautifully
The warm mid-tone finish works particularly well when you want the timber feature to add noticeable character without making the room feel overly dark.
Bring real timber warmth, architectural slat detail and acoustic comfort into your space with a lightweight, self-adhesive panel system designed to make the transformation achievable for DIY renovators.
What you’ll need
- Tape measure
- Pencil
- Level or laser level (recommended)
- Clean cloth + mild cleaner (or sugar soap) and warm water
- Sharp utility knife with spare blades
- Fine-tooth saw or circular saw (recommended for straighter cuts)
- Optional: construction adhesive (for textured/low-grip walls or extra hold)
- Optional: roller (wallpaper seam roller) to help press down firmly
Step-by-step
Walls must be clean, dry, smooth and dust-free. Wipe down with sugar soap (or mild cleaner) and allow to dry fully. Avoid applying to freshly painted walls—ensure paint has cured.
Choose your starting edge and mark a straight reference line with a level. Decide slat direction and spacing (keep joins and edges consistent for the cleanest finish).
Hold each panel in position before sticking to confirm alignment, height and cut points (especially around skirting, corners, power points and trims).
Measure and cut panels to fit. For best results, use a fine-tooth saw for straight cuts. A sharp utility knife can be used to trim felt and small adjustments. Measure twice, cut once.
Peel the backing gradually (don’t remove it all at once). Align to your reference line, then press from the centre outwards. Keep edges tight and straight as you go.
Apply firm, even pressure across the entire panel (hands or a roller). Pay extra attention to edges and corners. If your wall is textured or paint is low-grip, add construction adhesive for extra hold.
Work panel by panel, checking alignment as you go. Keep slats parallel and maintain consistent spacing at joins for a seamless feature wall look.
Do a final firm press along all edges and joins. If you’re adding trims or finishing strips, install them last for a clean, professional finish.
For best adhesion, avoid installing on rough/textured walls, dusty surfaces, or walls exposed to moisture. If you’re unsure about your surface, use construction adhesive for added security.
We ship Australia-wide via courier. Shipping timeframes vary by location and stock availability.
If you’re in a remote area and have any concerns about delivery, please reach out before ordering.
Please refer to our returns policy for eligibility and timeframes.
These panels are self-adhesive laminate timber veneer faced acoustic wall panels that combine a modern walnut, nordic oak or charcoal oak finish with sound-absorbing performance. They are ideal for reducing echo and improving sound quality in spaces such as living rooms, bedrooms, home offices and media rooms.
No. These panels are designed to reduce echo and reverberation, not to fully soundproof a space. The level of improvement depends on room size, layout and how much wall area is covered.
Each panel measures approximately 1200 mm x 600 mm with a thickness of around 20 mm.
Each pack contains two panels and covers approximately 1.44 m².
Yes. The panels feature a peel-and-stick backing and are suitable for DIY installation. No specialist tools or trades are required.
They should be installed on clean, dry and smooth interior surfaces such as painted plasterboard, sealed walls or cabinetry. For best results, ensure the surface is free from dust, grease and moisture.
Yes. Panels can be trimmed to size using a sharp utility knife or fine saw to fit around power points, edges or custom layouts.
In most cases, the self-adhesive backing is sufficient. For textured walls or added security, a construction adhesive can be used.
They feature a timber-look veneer on the front with an acoustic felt backing that helps absorb sound.
The timber veneer can be lightly sanded and painted or stained if you wish to customise the finish prior to installation.
No. These panels are designed for dry internal spaces only. Prolonged exposure to moisture may affect adhesion and performance.
These panels are designed for vertical wall installation. Ceiling installation is not recommended due to weight and adhesive limitations.
Light dusting with a soft cloth or vacuum brush attachment is recommended. Avoid water and harsh cleaning products.
Panels can be removed, however some adhesive residue or minor paint damage may occur depending on the wall surface. Gentle heat can assist with removal.
This was my front entry hallway makeover
I love the panels! They came very quickly in a couple of days, even when I ordered extras. The paneling is beautiful and so easy to apply and cut to shape if needed just with a Stanley knife. It really elevates my living room and would definitely recommend!
Perfect for DIY Feature Walls on Any Budget
Choose from a range of colours
-
Sample Kit - Acoustic Panels
Regular price $9.95 AUDRegular price -
Acoustic Peel & Stick Panels - Walnut
Regular price $140.00 AUDRegular price -
Acoustic Peel & Stick Panels - Nordic Oak
Regular price $140.00 AUDRegular price -
Acoustic Peel & Stick Panels - Charcoal Oak
Regular price $140.00 AUDRegular price
