DESIGNER WALL PANELS
Acoustic Peel & Stick Panels - Charcoal Oak
Acoustic Peel & Stick Panels - Charcoal Oak
Panel Pack Calculator
Enter your project areas below (use centimetres).
Area 1
Not sure? Contact our team — we’ll double-check for you!
In stock and ready to despatch
Product Description
Bold, modern and architecturally refined.
Create a Striking Architectural Feature — Without the Heavy Panels or Complicated Installation
Make a stronger design statement with our Charcoal Oak Acoustic Wood Panels. The deep charcoal timber tone, visible natural grain and clean vertical slat pattern create a sophisticated, contemporary feature that works beautifully in modern homes, media spaces, offices and commercial interiors.
Want the dramatic acoustic-panel look without wrestling with oversized, heavy panels?
Traditional acoustic panels are often supplied in long lengths that can be cumbersome to transport, difficult to manoeuvre and awkward to hold against the wall during installation. Many systems also require drilling, locating studs or mechanically fixing each panel into place.
Our Charcoal Oak panels make the process far more approachable. At 120cm × 60cm, they're lightweight and manageable, while the self-adhesive backing means you can create a bold architectural wall without turning it into a major installation project.
Deep Timber Tones for a Stronger, More Architectural Interior
Charcoal Oak is designed for spaces where you want the wall to make a statement. The deep charcoal colouring creates strong contrast, while the visible timber grain prevents the finish from feeling flat or overly industrial. The result is a refined, contemporary look that feels particularly at home in media rooms, offices and modern feature spaces.
Why Choose Charcoal Oak Acoustic Panels?
& STICK
No Nails. No Liquid Adhesive. No Hunting for Wall Studs.
The self-adhesive backing removes much of the complexity associated with traditional large acoustic panels. Prepare a suitable wall surface, position the panel carefully, peel away the backing and press firmly into place. It's a cleaner and more DIY-friendly approach to creating a premium slatted feature wall.
Why Our 120cm × 60cm Panels Make Installation Easier
Many acoustic wall systems use panels well over two metres long. That might create fewer sections on the wall, but it also means more weight, more awkward handling and a much more difficult DIY installation.
Designed to Help Reduce Unwanted Echo and Sound Reflection
The slatted surface works together with the acoustic felt backing to help absorb sound and soften unwanted echo within the room, while also creating a highly decorative architectural wall finish.
This makes Charcoal Oak particularly well suited to media rooms, home offices, meeting spaces and other interiors where both visual impact and acoustic comfort matter.
Where Charcoal Oak Makes the Biggest Impact
The darker finish works particularly well where you want the panelled wall to become a deliberate design feature rather than simply blending into the room.
Add depth, texture and acoustic comfort to your space with a lightweight, self-adhesive panel system designed to deliver a bold contemporary look while remaining achievable for DIY renovators.
What you’ll need
- Tape measure
- Pencil
- Level or laser level (recommended)
- Clean cloth + mild cleaner (or sugar soap) and warm water
- Sharp utility knife with spare blades
- Fine-tooth saw or circular saw (recommended for straighter cuts)
- Optional: construction adhesive (for textured/low-grip walls or extra hold)
- Optional: roller (wallpaper seam roller) to help press down firmly
Step-by-step
Walls must be clean, dry, smooth and dust-free. Wipe down with sugar soap (or mild cleaner) and allow to dry fully. Avoid applying to freshly painted walls—ensure paint has cured.
Choose your starting edge and mark a straight reference line with a level. Decide slat direction and spacing (keep joins and edges consistent for the cleanest finish).
Hold each panel in position before sticking to confirm alignment, height and cut points (especially around skirting, corners, power points and trims).
Measure and cut panels to fit. For best results, use a fine-tooth saw for straight cuts. A sharp utility knife can be used to trim felt and small adjustments. Measure twice, cut once.
Peel the backing gradually (don’t remove it all at once). Align to your reference line, then press from the centre outwards. Keep edges tight and straight as you go.
Apply firm, even pressure across the entire panel (hands or a roller). Pay extra attention to edges and corners. If your wall is textured or paint is low-grip, add construction adhesive for extra hold.
Work panel by panel, checking alignment as you go. Keep slats parallel and maintain consistent spacing at joins for a seamless feature wall look.
Do a final firm press along all edges and joins. If you’re adding trims or finishing strips, install them last for a clean, professional finish.
For best adhesion, avoid installing on rough/textured walls, dusty surfaces, or walls exposed to moisture. If you’re unsure about your surface, use construction adhesive for added security.
We ship Australia-wide via courier. Shipping timeframes vary by location and stock availability.
If you’re in a remote area and have any concerns about delivery, please reach out before ordering.
Please refer to our returns policy for eligibility and timeframes.
These panels are self-adhesive laminate timber veneer faced acoustic wall panels that combine a modern walnut, nordic oak or charcoal oak finish with sound-absorbing performance. They are ideal for reducing echo and improving sound quality in spaces such as living rooms, bedrooms, home offices and media rooms.
No. These panels are designed to reduce echo and reverberation, not to fully soundproof a space. The level of improvement depends on room size, layout and how much wall area is covered.
Each panel measures approximately 1200 mm x 600 mm with a thickness of around 20 mm.
Each pack contains two panels and covers approximately 1.44 m².
Yes. The panels feature a peel-and-stick backing and are suitable for DIY installation. No specialist tools or trades are required.
They should be installed on clean, dry and smooth interior surfaces such as painted plasterboard, sealed walls or cabinetry. For best results, ensure the surface is free from dust, grease and moisture.
Yes. Panels can be trimmed to size using a sharp utility knife or fine saw to fit around power points, edges or custom layouts.
In most cases, the self-adhesive backing is sufficient. For textured walls or added security, a construction adhesive can be used.
They feature a timber-look veneer on the front with an acoustic felt backing that helps absorb sound.
The timber veneer can be lightly sanded and painted or stained if you wish to customise the finish prior to installation.
No. These panels are designed for dry internal spaces only. Prolonged exposure to moisture may affect adhesion and performance.
These panels are designed for vertical wall installation. Ceiling installation is not recommended due to weight and adhesive limitations.
Light dusting with a soft cloth or vacuum brush attachment is recommended. Avoid water and harsh cleaning products.
Panels can be removed, however some adhesive residue or minor paint damage may occur depending on the wall surface. Gentle heat can assist with removal.
Completely changed the entire vibe. Did the island bench and feature wall. They came up looking so good. Best customer service I had anywhere
Great little shop revamp!
These panels are incredible! I wish I had more places in my house to put them!!
Product is fine… but looks and feels cheaper in person than what it looks on the website.
Perfect for DIY Feature Walls on Any Budget
Choose from a range of colours
-
Sample Kit - Acoustic Panels
Regular price $9.95 AUDRegular price -
Acoustic Peel & Stick Panels - Walnut
Regular price $140.00 AUDRegular price -
Acoustic Peel & Stick Panels - Nordic Oak
Regular price $140.00 AUDRegular price -
Acoustic Peel & Stick Panels - Charcoal Oak
Regular price $140.00 AUDRegular price
