Frequently Asked Questions
Everything you need to know about our Peel and Stick Vinyl Floor Tiles, including installation, surfaces, wet areas, sizing and removal.
Our Peel and Stick Vinyl Floor Tiles are self-adhesive floor tiles suitable for use over existing floor tiles and a range of other surfaces.
Made from PVC material, our floor tile range features bold designs and colours for homeowners and passionate DIY renovators who want an easy installation without sacrificing style.
Much like our other Stick on Tiles range, they require no grout, are easy to clean, affordable and can dramatically makeover your space instantly.
Our Vinyl Floor Stick on Tiles are designed to install directly over:
- Existing tiles, including ceramic, porcelain and marble
- Smooth concrete floors
- Smooth wood floors
- Composite flooring
- Standard gyprock and plasterboard for wall features or splashbacks
Just ensure your surface is clean, dry and in good condition before installation. No sanding or special preparation is needed in most cases.
These tiles are also great for splashbacks or other wall décor features. For an even more seamless, waterproof finish, we recommend applying all-purpose silicone along all edges.
Yes, our Vinyl Floor Tiles can be used on walls or splashbacks. While they come with an adhesive backing for convenient installation on horizontal flat surfaces, some wall or splashback applications may require a stronger adhesive or spot fixes for optimal performance.
In these cases, we recommend using a solvent-free, water-based adhesive designed for vinyl tiles and flooring. This provides strong bonding power, is low odour and is easy to clean up.
A suitable option is Selleys 500ml Kwik Grip Horizontal Contact Adhesive, which is designed to work effectively on surfaces such as timber, concrete and fibre-cement.
Our Vinyl Floor Tiles measure 30cm x 30cm, while our Vinyl Floor Planks measure 60cm x 15cm.
Further information on our Vinyl Floor range can be found in the product information on each item. There is also a tile calculator on each page to help confirm the amount needed for your project space.
Our Vinyl Floor Tile range is water-resistant and features a P3-rated anti-slip surface, making it suitable for use in bathrooms, powder rooms and other wet areas.
We do not typically recommend installation inside showers due to ongoing water exposure and elevated temperatures that may affect the adhesive. However, some customers have chosen to install the tiles in these areas by taking extra steps to improve water resistance.
These steps include:
- Sealing all perimeter edges and corners with waterproof silicone.
- Using silicone or epoxy grout to fill joins and prevent water ingress.
These additional measures can help improve the longevity of the tiles in wet areas. However, if you choose to install them in environments such as shower floors, this is done entirely at your own discretion.
As this falls outside our standard installation guidelines, we are unable to guarantee performance or accept responsibility for any issues that may arise. That said, thousands of customers have safely installed our vinyl floor tiles in bathrooms and laundry areas using these additional waterproofing steps and achieved great results in DIY and rental spaces alike.
Yes, these tiles can be removed in the future. However, they may leave adhesive residue or lift paint during the removal process, depending on the surface underneath.
We recommend first heating the adhesive glue using a hair dryer, then slowly peeling the tiles off.
We sell all our tiles by the sheet as a single sheet, as well as in packs of 10, 20, 30 and more. This means you can order the exact amount you need for your project space.
You can use the Tile Calculator on each product page to confirm the total number of sheets needed for your space.
Still have questions?
Reach out to our team for product recommendations, installation advice or help choosing the right Peel and Stick Vinyl Floor Tiles for your space.
Email info@stickontiles.com.au