DESIGNER WALL PANELS
Scallop Timber Panels - Oak Grain
Scallop Timber Panels - Oak Grain
Wall Panel Calculator
Choose your panel type and enter your project areas below in centimetres.
Area 1
Not sure? Contact our team — we’ll double-check for you!
In stock and ready to despatch
Trying to choose the right tile?
Sample Kit - Timber Panels
- Choose up to 2 designs
- Test at home
- Redeem on your order
- See the colour and finish in your space before committing.
- Compare against paint colours and fixtures.
- Ideal for cabinet fronts and feature walls.
Tip: Order samples first to avoid “nearly right” regrets.
Product Description
Add warmth and texture to your interior with our Scalloped Flexible Wall Panels – Oak Grain.
Featuring a natural oak grain surface and flexible MDF core, these panels bring the look of real timber wall panelling while remaining lightweight and easy to install. The scalloped profile creates a soft architectural rhythm that enhances feature walls and interior spaces.
The natural oak veneer surface can be stained, oiled or sealed, allowing you to customise the final finish to suit your interior design.
Perfect for residential and commercial interiors where you want the appearance of timber panels without the weight and complexity of traditional installations.
Why You'll Love Them
• Natural oak veneer surface ready for staining
• Elegant scalloped fluted design
• Flexible panels suitable for curved walls or columns
• Lightweight DIY installation
• Ideal for feature walls, reception areas and bedrooms
Specifications
Panel size: 120cm × 60cm
Coverage per panel: 0.72m²
Panels per carton: 2
Coverage per carton: 1.44m²
Finish: Natural oak veneer
What you’ll need
- Tape measure
- Pencil
- Level or laser level
- Circular saw, jigsaw or fine-tooth handsaw
- Construction adhesive suitable for timber or decorative wall panels
- Caulking gun
- Sandpaper for edge clean-ups
- Clean cloth for dust removal
- Paint, clear finish, oil or stain depending on your selected panel finish
Step-by-step
Measure the full width and height of your wall, including any windows, cabinetry, bulkheads or power points.
Dry lay your panels first and use a level or laser line to mark a straight starting point.
Make sure the wall is clean, dry, dust free, grease free and as smooth as possible before installation.
Use a circular saw, jigsaw or fine-tooth handsaw. Cut slowly and support the panel well for a cleaner edge.
Place your cut panels in position to check fit, spacing, alignment and the final visual balance.
Apply construction adhesive to the back of the panel in beads or lines, following the adhesive manufacturer’s instructions.
Press each panel firmly onto the wall, checking that it is straight and aligned with the previous panel.
Allow the adhesive to fully cure before painting, sealing or placing stress on the panels.
Paint pre-primed panels, or seal, oil or stain oak and birch panels depending on your desired finish.
Recommended Adhesive
Use a quality construction adhesive suitable for MDF, timber or decorative wall panels. Adhesive selection should be based on your wall surface and installation conditions.
Flexible Wall Panel orders are shipped by courier. Due to their size, delivery to some remote locations may be limited or may require an additional freight charge.
If we are unable to ship to your location, or if the freight cost exceeds the amount paid at checkout, we will contact you before dispatch.
Please check all panels before installing. Returns cannot be accepted for panels that have been cut, glued, painted, stained, sealed or installed. Return shipping is at the customer's expense.
