DESIGNER WALL PANELS
Demi Round Timber Panels - Oak Grain
Demi Round Timber Panels - Oak Grain
Wall Panel Calculator
Choose your panel type and enter your project areas below in centimetres.
Area 1
Not sure? Contact our team — we’ll double-check for you!
In stock and ready to despatch
Trying to choose the right tile?
Sample Kit - Timber Panels
- Choose up to 2 designs
- Test at home
- Redeem on your order
- See the colour and finish in your space before committing.
- Compare against paint colours and fixtures.
- Ideal for cabinet fronts and feature walls.
Tip: Order samples first to avoid “nearly right” regrets.
Product Description
Our Demi Round Flexible Wall Panels – Oak Grain combine natural timber warmth with bold architectural design.
The demi round profile creates a strong fluted wall texture, while the flexible MDF core allows the panels to adapt to curved or flat surfaces. The natural oak veneer surface can be stained or finished to achieve a wide range of timber tones.
These panels are ideal for premium feature walls, media walls, reception areas and modern interiors.
Why You'll Love Them
• Natural oak veneer finish
• Bold demi round fluted wall design
• Flexible panels suitable for curved installations
• Lightweight and DIY friendly installation
• Perfect for modern architectural interiors
Specifications
Panel size: 120cm × 60cm
Coverage per panel: 0.72m²
Panels per carton: 2
Coverage per carton: 1.44m²
What you’ll need
- Tape measure
- Pencil
- Level or laser level
- Circular saw, jigsaw or fine-tooth handsaw
- Construction adhesive suitable for timber or decorative wall panels
- Caulking gun
- Sandpaper for edge clean-ups
- Clean cloth for dust removal
- Paint, clear finish, oil or stain depending on your selected panel finish
Step-by-step
Measure the full width and height of your wall, including any windows, cabinetry, bulkheads or power points.
Dry lay your panels first and use a level or laser line to mark a straight starting point.
Make sure the wall is clean, dry, dust free, grease free and as smooth as possible before installation.
Use a circular saw, jigsaw or fine-tooth handsaw. Cut slowly and support the panel well for a cleaner edge.
Place your cut panels in position to check fit, spacing, alignment and the final visual balance.
Apply construction adhesive to the back of the panel in beads or lines, following the adhesive manufacturer’s instructions.
Press each panel firmly onto the wall, checking that it is straight and aligned with the previous panel.
Allow the adhesive to fully cure before painting, sealing or placing stress on the panels.
Paint pre-primed panels, or seal, oil or stain oak and birch panels depending on your desired finish.
Recommended Adhesive
Use a quality construction adhesive suitable for MDF, timber or decorative wall panels. Adhesive selection should be based on your wall surface and installation conditions.
Flexible Wall Panel orders are shipped by courier. Due to their size, delivery to some remote locations may be limited or may require an additional freight charge.
If we are unable to ship to your location, or if the freight cost exceeds the amount paid at checkout, we will contact you before dispatch.
Please check all panels before installing. Returns cannot be accepted for panels that have been cut, glued, painted, stained, sealed or installed. Return shipping is at the customer's expense.
