DESIGNER WALL PANELS
Scallop Timber Panels - Primed
Scallop Timber Panels - Primed
Wall Panel Calculator
Choose your panel type and enter your project areas below in centimetres.
Area 1
Not sure? Contact our team — we’ll double-check for you!
In stock and ready to despatch
Trying to choose the right tile?
Sample Kit - Timber Panels
- Choose up to 2 designs
- Test at home
- Redeem on your order
- See the colour and finish in your space before committing.
- Compare against paint colours and fixtures.
- Ideal for cabinet fronts and feature walls.
Tip: Order samples first to avoid “nearly right” regrets.
Product Description
Create modern architectural feature walls with our Scalloped Flexible Wall Panels – Pre-Primed.
Designed with a flexible MDF core and a smooth paint-ready surface, these panels allow you to achieve the popular fluted wall panel look while keeping installation simple and lightweight. The scalloped profile creates a soft flowing texture that adds depth and dimension to any interior space.
The flexible construction makes these panels ideal for flat walls, gentle curves, columns, caravans and custom joinery, giving you design flexibility that traditional rigid wall panels cannot offer.
Simply install and paint to match your interior colour palette.
Why You'll Love Them
• Smooth pre-primed paint-ready finish
• Soft scalloped fluted profile for modern interiors
• Flexible design suitable for curved or flat walls
• Lightweight and DIY friendly installation
• Perfect for feature walls, bedheads, hallways and media walls
Specifications
Panel size: 120cm × 60cm
Coverage per panel: 0.72m²
Panels per carton: 2
Coverage per carton: 1.44m²
Finish: White primer (paint ready)
Core: Flexible MDF panel
What you’ll need
- Tape measure
- Pencil
- Level or laser level
- Circular saw, jigsaw or fine-tooth handsaw
- Construction adhesive suitable for timber or decorative wall panels
- Caulking gun
- Sandpaper for edge clean-ups
- Clean cloth for dust removal
- Paint, clear finish, oil or stain depending on your selected panel finish
Step-by-step
Measure the full width and height of your wall, including any windows, cabinetry, bulkheads or power points.
Dry lay your panels first and use a level or laser line to mark a straight starting point.
Make sure the wall is clean, dry, dust free, grease free and as smooth as possible before installation.
Use a circular saw, jigsaw or fine-tooth handsaw. Cut slowly and support the panel well for a cleaner edge.
Place your cut panels in position to check fit, spacing, alignment and the final visual balance.
Apply construction adhesive to the back of the panel in beads or lines, following the adhesive manufacturer’s instructions.
Press each panel firmly onto the wall, checking that it is straight and aligned with the previous panel.
Allow the adhesive to fully cure before painting, sealing or placing stress on the panels.
Paint pre-primed panels, or seal, oil or stain oak and birch panels depending on your desired finish.
Recommended Adhesive
Use a quality construction adhesive suitable for MDF, timber or decorative wall panels. Adhesive selection should be based on your wall surface and installation conditions.
Flexible Wall Panel orders are shipped by courier. Due to their size, delivery to some remote locations may be limited or may require an additional freight charge.
If we are unable to ship to your location, or if the freight cost exceeds the amount paid at checkout, we will contact you before dispatch.
Please check all panels before installing. Returns cannot be accepted for panels that have been cut, glued, painted, stained, sealed or installed. Return shipping is at the customer's expense.
